Cirrus 3D Linear
The Cirrus3D linear range is designed to scan parts on a conveyor. They can also be mounted on a linear axis to scan very big parts.
-
Due to its unique conveyor calibration method, it is much easier to use and setup than alternate solutions with laser triangulation. This method enables the Cirrus3D to learn the conveyor axis, the conveyor plane, and the encoder resolution. it takes only a few minutes. After this calibration, the Cirrus3D send to the software 3d points profiles as if it was perfectly placed on a plane perpendicular to the conveyor axis. All angles offset are compensated, enabling a simple and low cost fixed bracket to hold the Cirrus3D.
Cirrus3D Model Cirrus3D C 100 Cirrus3D C/R 300 Cirrus3D C500 Cirrus3D C1000 Cirrus3D C1500 Minimum Working Distance (mm) 150 410 630 1280 1850 Visible Width at Minimum Distance (mm) 120 330 500 1000 1500 Resolution at Minimum Distance 30µm 100µm 150µm 350µm 560µm Maximum Working Distance (mm) 185 580 1000 3000 4000 Visible Width at Maximum Distance (mm) 150 460 750 2200 3000 Sensor Dimensions (W×H×D) (mm) 195×53×131 269×53×131 389×53×131 599×53×131 749×53×131 Sensor Weight (Kg) 1.9 2,3 3,30 5,00 6,30